Personal Audio System
h.ear go (SRS-HG1)
Connecting to an AC outlet
You can operate the speaker by connecting to the AC outlet with the supplied USB AC adaptor or by using the built-in lithium-ion
battery (rechargeable).
Before using the speaker for the first time, be sure to charge the battery by connecting the speaker to an AC outlet via the
supplied USB AC adaptor and micro-USB cable.
When connecting the micro-USB cable to the DC IN 5 V jack, the (power) indicator starts flashing in green after about two
seconds, and then the speaker enters the start-up mode. It takes about 15 to 30 seconds. After that, the (power) indicator is lit
in red (standby mode), and you can turn on the speaker.
*1
When the battery is charged, you can use the speaker without using the USB AC adaptor.
For the protection of the battery, the (power)/ PAIRING button is locked when shipping.
*1
Connect the supplied USB AC adaptor and micro-USB cable.
1
Connect the micro-USB cable to a DC IN 5 V jack.
2
Connect the USB AC adaptor to an AC outlet.
Do not use other than the supplied USB AC adaptor, micro-USB cable, and AC power cord.
When the speaker is connected to an AC outlet via the USB AC adaptor, charging starts and the CHARGE indicator lights up
in orange. Charging is completed in about 3 hours
*2
and the indicator turns off.
3
When the speaker is turned off, time that is required to charge the empty battery to its full capacity.
*2
32
Summary of Contents for H.ear go SRS-HG1
Page 43: ...Help Guide Personal Audio System h ear go SRS HG1 Parts and controls Top and bottom Rear 27 ...
Page 149: ...Select Network 3 Select Connections and then select the icon with Connected using or 4 133 ...
Page 201: ...Related Topic Trademarks 4 589 712 11 2 Copyright 2016 Sony Corporation 185 ...