background image

SERVICE MANUAL

Sony Video & Sound Products Inc.

Published by Sony Techno Create Corporation

SPECIFICATIONS

HOME AUDIO SYSTEM

9-896-261-02

2016B33-1

© 

2016.02

US Model

Canadian Model

AEP Model

UK Model

Australian Model

Ver. 1.1  2016.02

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION:
(The United States model only)

Left/Right Channel:

driven, from 120 

RMS power, with no more than 
0.7% total harmonic distortion from 

Speaker section

Speaker system:

T Woofer

Tweeter L/R:

Woofer:

Inputs

AUDIO/PARTY CHAIN IN L/R:

Outputs

AUDIO/PARTY CHAIN OUT L/R:

USB section and supported 
audio formats

 (USB) port:

Supported bit rate:

MP3 (MPEG1 Audio Layer-3):  

Sampling frequencies:

MP3 (MPEG1 Audio Layer-3): 
32/44.1/48 kHz
WMA: 44.1 kHz

BLUETOOTH section

Communication system:

BLUETOOTH Standard version 3.0

Output:

BLUETOOTH Standard Power Class 2

Maximum communication range:

Line of sight approx. 10 m (33 feet)

1)

Frequency band:

2.4 GHz band (2.4000 GHz – 

Modulation method:

FHSS (Freq Hopping Spread 
Spectrum)

Compatible BLUETOOTH profiles

2)

:

A2DP (Advanced Audio Distribution 
Profile)
AVRCP (Audio Video Remote Control 
Profile)
SPP (Serial Port Profile)

Supported codecs:

SBC (Sub Band Codec)
AAC (Advanced Audio Coding)
LDAC

1)

  The actual range will vary depending 

on factors such as obstacles between 
devices, magnetic fields around a 
microwave oven, static electricity, 
reception sensitivity, antenna’s 
performance, operating system, software 
application, etc.

2)

  BLUETOOTH standard profiles indicate the 

purpose of BLUETOOTH communication 
between devices.

With 3 ohms loads, both channels 

30 watts per channel minimum 

50 mm (2 in) × 3, cone type

160 mm (6

in) × 2, cone type

Voltage 2 V, impedance 10 kilohms 

Voltage 2 V, impedance 600 ohms

Type A, maximum current 2.1 A

10,000 Hz; rated 

250 milliwatts to rated output.

 

32 kbps   320 kbps, VBR
WMA: 32 kbps   192 kbps, VBR

2.4835 GHz)

General

Power requirements: 

60 Hz

50/60 Hz

When BLUETOOTH standby mode is 

When BLUETOOTH standby mode is 

ports on)

Dimensions (W/H/D) (Approx.):

Mass (Approx.):

Quantity of the system:

1 piece

Supplied accessories: 

Remote control (1)
R03 (size AAA) batteries (2)
AC power cord (1)

Design and specifications are subject to 
change without notice.

North American model: AC 120 V,

 

Other models: AC 120 V 

– 

240 V,

Power consumption:

Standby power consumption:

60 W

set to off: 0.5 W (eco mode)

set to on: 2.8 W (all wireless network 

330 mm × 650 mm ×  340 mm (13 in 
× 25

in × 13

in)

12 kg (26 lb 16 oz)

GTK-XB7

Summary of Contents for GTK-XB7

























































Reviews: