GTK-XB60
GTK-XB60
19
19
2-19. SPEAKER UNIT (TW)
7ZHHWHUFDEOHDQG/('ERDUGFDEOHVHWWLQJ
3
terminal
(wide)
3
terminal
(narrow)
4
speaker unit (TW)
(tweeter:
left)
3
terminal
(wide)
3
terminal
(narrow)
4
speaker unit (TW)
(tweeter:
right)
front side
top side
bottom side
1
Draw the tweeter cable out
of the four grooves in front
panel.
2
two screws
(M3
u
10)
–
5HDUYLHZ
–
left side
groove
groove
groove
groove
top side
bottom side
2
screw
(M3
u
10)
2
screw
(M3
u
10)
OK
NG
SECTION 3
TEST MODE
Buttons and indicators position:
CHARGE
– Top view –
ADD
R
L
STAMINA
FUNCTION
USB AUDIO IN
SOFTWARE VERSION
It can con
fi
rm the software version.
Procedure:
1. Press the [
1
] button to turn the power on.
2. Press the [FUNCTION] button to select the AUDIO IN func-
tion.
3. Press two buttons of the [
u
] and [ADD] simultaneously for
5 seconds.
4. Each software version are shown by the
fl
ashing frequency of
LEDs simultaneously.
Example:
• When the MCU version is “v12”, the [ADD L] LED
fl
ashes 1
time, the [ADD R] LED
fl
ashes 2 times.
ADD
R
L
Flash
(1 time)
Flash
(2 times)
• When the MPEG version is “v14”, the [STAMINA] LED
fl
ashes 1 time, the [CHARGE] LED
fl
ashes 4 times.
CHARGE
STAMINA
FUNCTION
Flash
(1 time)
Flash
(4 times)
• When the BT version is “v062”, the [AUDIO IN] LED does
not
fl
ash, the [ ] LED
fl
ashes 6 times, the [USB] LED
fl
ashes
2 times.
USB AUDIO IN
Flash
(6 time)
flash
(2 times)
Not flash
FACTORY RESET
It can reset all settings and clear the Bluetooth linked list. Execute
this mode when returning the this unit to the customer.
Procedure:
1. Press the [
1
] button to turn the power on.
2. Press two buttons of the [FUNCTION] and [
–
] simultaneously
for 5 seconds.
3. The [ ], [USB], [AUDIO IN] and [
1
] LEDs
fl
ashes 2 times,
and then reboot the system.
CHARGE
USB AUDIO IN
flash
(2 times)
flash
(2 times)
