18
Menu System
Menu System
With this feature you can:
a) Individually attenuate the strength of a channel signal in case of a strong local aerial signal (striped picture).
b) Individually adjust the volume level of each channel.
c) Normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain better
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
Using the "Further Programme Preset" function
1
Press the
MENU
button on the remote control to display the menu
on the screen.
2
Push the joystick
$
to select the
symbol, then push
z
to enter the
Set Up
menu.
3
Push the joystick
$
or
4
to select
Manual Set Up
then push to
z
to enter.
4
Push the joystick
$
or
4
to select
Further Programme Preset
,
then push to
z
to enter.
5
Push the joystick
$
or
4
to select the relevant programme number,
then
push
z
repeatedly to select:
a)
ATT
(RF attenuator)
b)
VOL
(Volume Offset)
c)
AFT
(Automatic Fine Tuning) or
d)
DECODER
The selected item changes colour.
6
a)
ATT
Push the joystick
$
to select
On
, then press the
OK
button.
Repeat steps 5 and 6 a) to attenuate other channels.
b)
VOL
Push the joystick
$
or
4
to adjust the volume level of the channel
over a range of -7 to +7, then press the
OK
button. Repeat steps 5
and 6b) to adjust the volume level of the other channels.
c)
AFT
Push the joystick
$
or
4
to fine tune the channel frequency over
a range of -15 to +15, then press the
OK
button. Repeat steps 5 and
6c) if you wish to fine tune other channels.
d)
DECODER
Push the joystick
$
or
4
to select
AV1
(for a decoder connected
to the Scart
:
1/
) or
AV2
(for a decoder connected to the Scart
:
2/
q
2 (SMARTLINK)), then press the
OK
button.
Repeat steps 5 and 6d) to select the AV1 or AV2 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:
1/
or
:
2/
q
2 (SMARTLINK) on the back of the
set will appear on this programme number.
7
Press the
MENU
button to exit and return to the normal TV screen.
The set is now ready for use.
S
RM 903
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
TV
VIDEO
Picture Adjustment
Select:
Enter Menu:
Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise Reduction
Colour Tone
Personal
On
Off
Normal
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
Start Auto Tuning
Start
- - - - - - -
Enter:
Set Up
Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up
Select:
- - - - - - -
Manual Set Up
Select:
Enter:
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Personal ID
Demo
- - - - - - -
Further Programme Preset
Select:
Enter:
PROG
AFT
VOL
ATT
DECODER
On
On
On
Off
Off
Off
0
0
0
Off
Off
Off
1
2
3
4
5
6
7
8
9
10
11
PROG
AFT
VOL
ATT
DECODER
1
Off
On
PROG
AFT
VOL
ATT
DECODER
1
On
-5
2
PROG
AFT
VOL
ATT
DECODER
1
On
-5
2
Off
AV1
AV2
PROG
AFT
VOL
ATT
DECODER
1
On
- 5
