Sony Glasstron PLM-S700E, Service Manual

Page: 61 / 94

4-88
4-27. IC PIN FUNCTION DESCRIPTION
•
YC-148 BOARD IC1002 MC141628FUEB (Y/C SEPARATOR A/D, D/A CONVERTER)
Pin No. Pin Name I/O Function
1 VCOVDD — Power supply terminal (+5V) (for VCO)
2
BIAS I Bias current input terminal (for VCO)
3 OSCV I VCO control voltage input terminal Signal input from the PCOUT (pin
#¡
)
4
DAGND — Ground terminal (for D/A converter)
5
Y OUT O Brightness signal output terminal
6 DAVCC — Power supply terminal (+5V) (for D/A converter)
7
C OUT O Chroma signal output terminal
8
DAREF — Reference voltage terminal (for D/A converter)
9 IBIAS — Current control terminal of bias circuit for D/A, A/D converters
10
TEST I Setting terminal for the test mode (Normally: fixed at “L”)
11 PAL/NTSC I
Setting terminal for the video mode (NTSC/PAL)
“L”: PAL mode, “H”: NTSC mode (fixed at “L” in this set)
12 BYPASS I Setting terminal for the bypass selection (Normally: fixed at “L”)
13
PLLSEL I
For setting whether clock is entered by color subcarrier input (built-in PLL operation) or by
external clock input “L”: built-in PLL operation (fixed at “H” in this set)
14
ADGND — Ground terminal (for A/D converter)
15 ADVDD — Power supply terminal (+5V) (for A/D converter)
16 CLC I For setting time constant for internal clamp circuit (Normally: fixed at “H”)
17 CLOUT O Clamp voltage output terminal
18 V IN I Video signal input to the internal A/D converter
19 RBT —
Bottom reference voltage for A/D converter
Internal bottom reference voltage is supplied
20 RTP —
Top reference voltage for A/D converter
Internal top reference voltage is supplied
21 to 28 TB7 to TB0 I/O In/out terminal for the digital interface Not used (fixed at “L”)
29 CLK IN I Color subcarrier input from the MC44144DR2 (IC1003)
30 DVDD — Power supply terminal (+5V) (digital system)
31 PCOUT O Phase comparator output terminal
32 DGND — Ground terminal (digital system)