![background image](http://html.mh-extra.com/html/sony/gigajuke-nas-e35hd/gigajuke-nas-e35hd_operating-instructions-manual_420556059.webp)
5
GB
NAS-E35HD.GB.3-292-247-11(1)
USB device
The unit cannot start transferring audio
data to a USB device.
The following problems may have occurred.
The USB device is full.
The number of tracks and folders on the
USB device has reached the upper limit.
The USB device is write-protected.
The unit stops the transfer before it is
finished.
You are using an unsupported USB device. See
“USB devices supported by this unit” (page
71) for the supported USB devices.
The USB device is not formatted correctly.
Refer to the operating manual of the USB
device for the formatting operation.
Turn off the unit and disconnect the USB
device. If the USB device has a power switch,
turn off the USB device, and turn it on again
after you disconnected it from the unit. Then
perform the transfer operation again.
If the transfer and erase operations are done
repeatedly, the file structure within the
USB device becomes complex. Refer to the
operating manual of the USB device for how
to deal with this problem. If the problem
persists, contact your nearest Sony dealer.
Transferring to a USB device results in an
error.
You are using an unsupported USB device. See
“USB devices supported by this unit” (page
71) for the supported USB devices.
Turn off the unit and disconnect the USB
device. If the USB device has a power switch,
turn off the USB device, and turn it on again
after you disconnected it from the unit. Then
perform the transfer operation again.
The USB device was disconnected or the
power was turned off during transfer. Delete
the partially-transferred track and transfer
it again. If this does not solve the problem,
the USB device may be damaged. Refer to
the operating manual of the USB device for
how to deal with this problem. If the problem
persists, contact your nearest Sony dealer.
Tracks or folder on the USB device cannot
be erased.
Check if the USB device is write-protected.
The USB device was disconnected or the
power was turned off during erase operation.
Delete the partially-erased track. If this does
not solve the problem, the USB device may be
damaged. Refer to the operating manual of the
USB device for how to deal with this problem.
If the problem persists, contact your nearest
Sony dealer.
USB function does not work correctly.
You are using an unsupported USB device.
If you connect an unsupported USB device,
the following problems may occur. See “USB
devices supported by this unit” (page 71) for
the supported USB device types.
The USB device is not recognized.
Track or folder names are not displayed on
this unit.
Playback is not possible.
The sound skips.
There is noise.
A distorted sound is output.
Importing or transferring stops before it is
finished.
Summary of Contents for GigaJuke NAS-E35HD
Page 5: ... GB ...
Page 76: ...Printed in China ...