NAS-SC500PK.GB.4-114-863-
11
(1)
GB
Playing audio data stored on the “GIGA
JUKE” Music Server through the “GIGA JUKE”
Wireless Player
You can use the “GIGA JUKE” Wireless Player to play audio data stored on your “GIGA JUKE” Music
Server.
Before you can do this, you must first connect the “GIGA JUKE” Wireless Player to the “GIGA JUKE”
Music Server. For details on connections, refer to the supplied leaflet “Setup Guide” or the “Network
connection and setup” section in this manual (page 98).
This operation is performed on the “GIGA JUKE” Wireless Player.
Note
If standby mode on the “GIGA JUKE” Music Server is set to “Standard (power save)” (page 125), the “GIGA JUKE”
Wireless Player will not be able to connect to the “GIGA JUKE” Music Server.
HOME NETWORK
/
/
/
/ ENTER
1
Press HOME NETWORK on the “GIGA JUKE” Wireless Player.
2
Confirm that the name of the “GIGA JUKE” Music Server (e.g., [NAS-S500HDE])
the “GIGA JUKE” Music Server (e.g., [NAS-S500HDE])
appears in the server selection display, and then press ENTER.
If the name of the “GIGA JUKE” Music Server does not appear,
press
to select [Update info], and then press ENTER.
The next time you press HOME NETWORK, the unit automatically connects to the last connected
server and the playback window appears (the server selection display does not appear).
Summary of Contents for Giga Juke NAS-SC500PK
