NAS-SC500PK.GB.4-114-863-
11
(1)
1
GB
Checking the contents of a timer setting
Press TIMER on the remote control.
The timer list display appears.
Press TIMER again to make the display disappear.
Recording Timer icon
Wake Up Timer icon
Title
Setting name
Date
Setting date
Time
Start time and stop time of the
Recording Timer.
(blue) The Recording Timer is in standby
mode.
(red)
The Recording Timer is active.
(gray) The Recording Timer is suspended.
Failed recording
This icon appears when the
Recording Timer has failed due to
a power failure or other accident.
This icon does not appear when the
timer is set for regular intervals,
such as everyday or every week. In
this case, the setting remains even
if a recording failure has occurred.
The results of the failed recording,
however, should be deleted (this
page).
To delete a timer setting
1
Press TIMER on the remote control.
The timer list display appears.
2
Select the setting you want to delete.
3
Press DELETE on the remote control,
or enter the Options menu and select
[Delete].
A confirmation window appears.
4
Select [Yes].
The selected setting is deleted from the list.
If you select [No], the operation is cancelled.
5
Press TIMER on the remote control or
BACK.
To change a timer setting
1
Press TIMER on the remote control.
2
Select the setting you want to
change.
The change setting display appears.
3
Select the item you want to change.
4
Change the item.
5
Select [OK].
The new information overwrites the old one
and is displayed in the timer list.
6
Press TIMER on the remote control or
BACK.
Tip
You can perform the same operation using the Options
menu.
Summary of Contents for Giga Juke NAS-SC500PK
