Airpeak gimbal setting guide
I
Manual adjustment of motor parameters
9
Hint: The graph screen on the right figure below, you can see that the graph goes over the
center part and penetrates to the lower side (so-called “overshoot”).
NO Overshoot
Overshoot
Hint: In the left figure below, there is no overshoot in the positive direction, but there is in the
negative direction. Increase the TILT value to eliminate the overshoot in both direction as shown
in the figure on the right.
Overshoot
NO overshoot
No Overshoot
NO overshoot
4. Adjust motor parameters on each axis
(continued)
