16
KDL-40V4100/40V4150
KDL-40V4100/40V4150
1 Remove 4 screws from Top Vesa Brackets
2 Remove 5 screws from Top Main Bracket
3 Remove 6 screws from Spine Frames
4 Remove 4 screws from Bottom Vesa Brackets
5 Remove 4 screws from Bottom Frame
1-7. STRUCTURAL FRAMES AND BRACKETS REMOVAL
1-8. LCD PANEL REMOVAL
1 Disconnect 2 connectors
2 Remove 2 screws
5
4
Bottom Frame
Vesa (Top)
Spine Frame
Vesa (Bottom)
1
3
2
NOTE: The LVDS cable can only be installed one way. There is colored tape on the cable to determine which side is attached
to the TCON and which side is attached to the BU Board. Refer to Wire Dressing Illustration “Installation Procedure”
on Page 33.
LCD Panel
Bezel Assembly
2
1
