manualshive.com logo in svg

Sony FilmStation UP-DF550, Manual

Share
Download
Sony FilmStation UP-DF550 Manual Download Page 51

Set

u

p

About the Setup Window

51

Components of Pages

Summary/Print Job Page

This page displays information on the UP-DF550.

A

Printer (printer status) display section

Printer Status: Displays the printer status.
Upper Tray Status: Indicates the status of film 
sheets loaded in film tray 1.

OK: Correct
Set Films/Papers...: Film sheets are not loaded.
Set Film/Paper Tray...: Film tray 1 is not 
inserted.

Lower Tray Status: Indicates the status of film 
sheets loaded in film tray 2.

OK: Correct
Set Films/Papers...: Film sheets are not loaded.
Set Film/Paper Tray...: Film tray 2 is not 
inserted.

UPPER TRAY MEDIA: Displays the type of blue 
thermal film loaded in film tray 1.
LOWER TRAY MEDIA: Displays the type of the 
blue thermal film loaded in film tray 2.

B

Printer Job List display section

Displays when a job is waiting to be printed.

C

Add test pattern to print job (for the default tray 
only)

Push this button to print the test pattern. The film 
sheets loaded in film tray 1 is used for this printing.

D

Refresh button

Click this button to update the window.

DICOM Settings Page

This page allows you to set up the IP address and 
DICOM AE title.

A

TCP/IP section

Setup Software Version: Displays the version of the 
setup window.
IP Address: Sets the IP address and displays it.
Sub-net Mask: Sets the Sub-net mask and displays 
it.
Default Gateway: Sets the default gateway and 
displays it.

B

Print Service section

DICOM Software Version: Displays the version of 
the DICOM software.
DICOM Software Serial #: Displays the serial 
number of the DICOM software.
AE Title: Sets the AE title and displays it.
Port ID: Displays the port number.
Status: Displays the status of the DICOM software.
Communication Log: Keeps a communication log 
if a checkmark is placed here.

C

Save settings button

Click this button to save the settings performed on 
this page. If you move to another page without 
pushing this button, the settings will be lost.

Summary of Contents for FilmStation UP-DF550



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands