Sony FDR-AXP33, Service Manual

Page: 28 / 130

4. Adjust the unit position so that the resolving power check chart becomes fully image frame as shown in Fig. 2-4-4.
At this point, be careful not to slide the unit.
Example of the shot image
Fig. 2-4-4
Checking method
1. Set the unit as the following and focus.
Focus: Manual
2. Shoot with self-timer.
3. Make sure that the shot image is obtained the criteria shown in Fig. 2-4-5.
Note
• Check if the patterns on the four corners are visually as the same resolution.
• Display the shot image using arbitrary viewer (Windows photo viewer etc.) at the same magnification. Check the
image solution.
Fig. 2-4-5
Near the limit
*
Check the five patterns in center and four corners at the same magnification. OK
OK
NG
NG or out of focus
FDR-AX30/FDR-AX33/FDR-AXP33/FDR-AXP35
2-8