background image

 

4

 

Safety Information

 

Do not open the cabinet and the rear 
cover of the TV. Refer to qualified 
service personnel only.

To prevent fire or shock 
hazard, do not expose the TV 
to rain or moisture.

For your own safety, do not touch 
any part of the TV, power lead or 
aerial lead during lightning 
storms. 

Do not cover the ventilation 
openings of the TV For 
ventilation, leave a space of at 
least 10cm all around the set.

Never place the TV in hot, humid 
or excessively dusty places. Do 
not install the TV where it may be 
exposed to mechanical vibrations.

To prevent fire, keep inflammable 
objects or naked lights (eg 
candles) away from the TV.

Clean the TV with a soft, lightly 

dampened cloth. Do not use 

benzine, thinner or any other 

chemicals to clean the TV. Do not 

scratch the TV screen. As a safety 

precaution, unplug the TV before 

cleaning it.

Pull out the power lead by the 
plug. Do not pull on the power 
lead itself.

Take care not to place heavy 
objects on the power lead as this 
could result in damage.
We recommend you wind any 
excess lead around the holders 
provided on the rear of the TV.

Place the TV on a secure stable 
stand. Do not allow children to 
climb on to it. Do not place the TV 
on its side or face up.

Do not cover the ventilation 
openings of the TV with items 
such as curtains or newspapers 
etc.

 

Safety Information 

 

 

 

Never push objects of any kind into 

the set as this could result in a fire 

or electric shock. Never spill liquid 

of any kind on the set. If any liquid 

or solid object does fall through, do 

not operate the TV. Have it checked 

immediately by qualified 

personnel. 

For environmental and safety 
reasons, it is recommended that 
the TV set is not left in standby 
mode when not in use. Disconnect 
from the mains.

This set is to operate on a 220-
240V AC supply only. Take care 
not to connect too many 
appliances to the same power 
socket as this could result in fire 
or electric shock.

Unplug the power lead before 
moving the TV. Avoid uneven 
surfaces, quick steps or excessive 
force. If the set has been dropped 
or damaged, have it checked 
immediately by qualified service 
personnel.

 

03GBKV24LS35U.fm  Page 4  Friday, September 21, 2001  12:23 PM

Summary of Contents for FD Trinitron KV-24LS35U

























Reviews: