background image

19

GB

Connecting to external Audio Equipment:

Plug in your Hi-Fi equipment to the audio output sockets 

E

 if you wish to amplify the audio 

output from TV. Next, using the menu system, select the “Sound Adjustment” menu. Enter the 
“Detail Adjustment” option and set “TV Speakers” to “Off”.

The audio level of the external speakers can be modified by pressing the volume buttons 
on the remote control. Also treble and bass settings can be modified through the “Sound 
Adjustment” menu.

To enjoy “Dolby Virtual” sound effect through your 
Hi-Fi equipment:

Place the speakers of your equipment in front of your 
sitting place and besides the TV set but keep a distance of 
50 cm from each speaker to the TV set.
Then by using the menu system, select the menu “Sound 
Adjustment”. Next select “Detail Adjustment” and set 
“Dolby Virtual” to “On”.

Using Optional Equipment

1

Connect your equipment to the designated TV socket, as indicated in the previous page.

2

Switch on the connected equipment.

3

To watch the picture of the connected equipment, press the 

 button repeatedly until the

 

correct input symbol appears on the screen.

Symbol

Input Signals

 

1

• Audio / video input signal through the Scart connector 

D

 

 

• RGB input signal through the Scart connector 

D

. This symbol appears only

 

if a RGB source has been connected. 

  

2

• Audio / video input signal through the Scart connector 

F

2

• S Video input signal through the Scart connector 

F

 

3

• Video input signal through the phono socket 

B

 and Audio input signal

 through 

C

3

• S Video Input signal through the front S Video input jack 

A

 and Audio 

signal through 

C

4

Press 

 button on the remote control to return to the normal TV picture. 

For Mono Equipment

Connect the phono plug to the (MONO) L/G/S/I socket on the front of the TV and select 

3 or 

3 input signal using the instructions above. Finally, refer to the “Sound Adjustment” section 

of this manual and select “Dual Sound” “A” on the sound menu screen.

S

S

S

Additional Information

Your sitting position

Right Hi-Fi 

Speaker

Left Hi-Fi 

Speaker

~50°

03GBKV24LS35U.fm  Page 19  Friday, September 21, 2001  12:23 PM

Summary of Contents for FD Trinitron KV-24LS35U

























Reviews: