Basic Functions
White Balance
White Balance has the following modes, all of which
can be set using VISCA Commands.
Auto White Balance
This mode computes the white balance value output
using color information from the entire screen. It
outputs the proper value using the color temperature
radiating from a black subject based on a range of
values from 3000 to 7500K.
This mode is the factory setting.
ATW
Auto Tracing White balance (2000 to 10000K)
Indoor
3200K Base Mode
Outdoor
5800K Base Mode
One Push WB
The One Push White Balance mode is a fixed white
balance mode that may be automatically readjusted
only at the request of the user (One Push Trigger),
assuming that a white subject, in correct lighting
conditions, and occupying more than 1/2 of the
image, is submitted to the camera.
One Push White Balance data is lost when the power
is turned off. If the power is turned off, reset One
Push White Balance.
Manual WB
Manual control of R and B gain, 256 steps each
Outdoor Auto
This is an auto white balance mode specifically for
outdoors. It allows you to capture images with
natural white balance in the morning and evening.
Sodium Vapor Lamp Auto
This is an auto white balance mode that is compatible
with sodium vapor lamps.
Sodium Vapor Lamp
This is a fixed white balance mode specifically for
sodium vapor lamps.
Automatic Exposure Mode
A variety of AE functions are available for optimal
output of subjects in lighting conditions that range
from low to high.
Full Auto
Auto Iris and Gain, Fixed Shutter Speed (NTSC: 1/60
sec., PAL: 1/50 sec.)
Gain Limit Setting
The gain limit can be set in the AE mode. Use this
setting when image signal-to-noise ratio is
particularly important.
Shutter Priority
1)
Variable Shutter Speed, Auto Iris and Gain
(1/1 to 1/10,000 sec., 16 high-speed shutter speeds
plus 6 low-speed shutter speeds)
1) Flicker can be eliminated by setting shutter to
1/100s for NTSC models used in countries with a 50 Hz
power supply frequency
1/120s for PAL models used in countries with a 60 Hz
power supply frequency
Iris Priority
Variable Iris (F1.6 to Close, 18 steps), Auto Gain and
Shutter speed
Manual
Variable Shutter, Iris and Gain
Bright
Variable Iris and Gain (Close to F1.6, 17 steps at
0 dB: F1.6, 15 steps from 0 to 28 dB)
AE – Shutter priority
The shutter speed can be set freely by the user to a total
of 22 steps – 16 high speeds and 6 low speeds. When
the slow shutter is set, the speed can be
1
/
30
s,
1
/
15
s,
1
/
8
s,
1
/
4
s,
1
/
2
s,
1
/
1
s. The picture output is read at a
normal rate from the memory. The memory is updated
at a low rate from the CCD. AF capability is low.
In high speed mode, the shutter speed can be set up to
1/10,000s. The iris and gain are set automatically,
according to the brightness of the subject.
Data
NTSC (s)
PAL (s)
15
1/10000
1/10000
14
1/6000
1/6000
13
1/4000
1/3500
12
1/3000
1/2500
11
1/2000
1/1750
10
1/1500
1/1250
0F
1/1000
1/1000
0E
1/725
1/600
0D
1/500
1/425
0C
1/350
1/300
0B
1/250
1/215
0A
1/180
1/150
09
1/125
1/120
08
1/100
1/100
07
1/90
1/75
06
1/60
1/50
05
1/30
1/25
04
1/15
1/12
03
1/8
1/6
02
1/4
1/3
01
1/2
1/2
00
1/1
1/1