31
FCB-IX47/IX47P
FCB-IX470/IX470P
VISCA™ Device Setting Command
Before starting control of the FCB camera, be sure to send the Address command and IF_Clear command using the broadcast.
For VISCA™ network administration
Address
: Sets the address of the peripheral device. Use when initializing the network, and receiving the
following network change message.
Network Change : Sent from the peripheral device to the controller when the device is removed or added from or to the
network. The address must be re-set when this message is received.
Packet
Note
Address
88 30 01 FF
Always broadcasted.
Network Change
X0 38 FF
X = 9 to F: FCB camera a 8
VISCA™ interface command
IF_Clear: Clears the command buffers in the FCB camera and cancels the command being executed.
Command Packet
Reply Packet
Note
IF_Clear
8X 01 00 01 FF
X0 50 FF
IF_Clear (broadcast)
88 01 00 01 FF
88 01 00 01 FF
X = 1 to 7: FCB camera board address (For inquiry packet)
X = 9 to F: FCB camera board a8 (For reply packet)
VISCA™ interface and inquiry
IF_DeviceTypeInq: Returns information on the VISCA™ interface.
Inquiry
Inquiry Packet
Reply Packet
Description
IF_DeviceTypeinq
8X 09 00 02 FF
Y0 50 GG GG HH HH JJ JJ KK FF
GGGG = Vender ID (0020: Sony)
HHHH = Model ID
0401: FCB-IX series
JJJJ = ROM revision
KK = Maximum socket # (02)
X = 1 to 7: FCB camera address (For inquiry packet)
X = 9 to F: FCB camera a8 (For reply packet)
VISCA™/RS-232C
Summary of Contents for FCB-IX47
Page 1: ...Instruction Manual Ver 1 01 English COLOR CAMERA MODULE FCB IX47 IX47P FCB IX470 IX470P ...
Page 4: ...2 FCB IX47 IX47P FCB IX470 IX470P DIMENSIONS Unit mm FCB IX47 IX47P FCB IX470 IX470P Unit mm ...
Page 25: ...23 Command List Ver 1 0 English ...