50
VF Menu List
Cha
p
te
r 4
Men
u
Con
fig
ur
at
ion an
d D
e
ta
iled
S
e
tt
in
gs
<Fan Mode>
Fan operating
mode select
Fan Mode
Auto2
Auto1, Auto2, Min, Max
Auto1: Automatic control, according to
the internal temperature.
Auto2: Automatic control, according to
the internal temperature, and
maintains quiet operation when
recording.
Min: Quiet mode, without
synchronization with recording (can
be used at ambient temperatures of
less than 30°C (86°F)).
Max: High-speed mode, fan rotates at
maximum speed.
<Date/Hour
Meter>
Date/Time
settings and
accumulated ON
time display
Date
--
yyyy/mm/dd
Sets the current date.
Time
--
hh:mm
Sets the current time.
Hour Meter
--
0H to 99999H
Displays the accumulated powered-ON
time since reset from the Service menu.
Date Type
Y/Mn/D
Y/Mn/D, Mn/D
Selects the date display format.
<Sync>
Sync signal
settings
Genlock
Input Signal
HD-Y
HD-Y, HD-SDI
Selects the input connector for the
external sync signal. The genlock signal
must be reapplied after modifying this
setting.
HD-Y: HD 3-level sync
HD-SDI: HD-SDI input
Status
--
Locked, Not Locked,
No Signal
Display only. Locked: Synchronized
successfully.
Not Locked: Not synchronized.
No Signal: There is no input signal.
<Battery Alarm>
Supply voltage
settings
DC IN (24V) Type
Type1
Type1, Type2
Selects the 24 V system supply settings.
Near End
22.2 V
20.5 V to 30.0 V
Sets the power supply voltage drop
warning level for the 24 V supply.
End
21.6 V
20.0 V to 24.0 V
Sets the power supply exhausted
warning level for the 24 V supply.
DC IN (12V) Type
Type1
Type1, Type2
Selects the 12 V system supply settings.
Near End
11.1 V
11.0 V to 17.0 V
Sets the power supply voltage drop
warning level for the 12 V supply.
End
10.8 V
10.5 V to 14.0 V
Sets the power supply exhausted
warning level for the 12 V supply.
Page
Configuration
item
Default
Settings
Remarks