36
Setting the Output Signal
Chapt
er
3
B
a
s
ic
A
d
jus
tment
s
and Se
tt
ing
s
3-6 Setting the Output
Signal
3-6-1 Selecting the Output Video
Signal
The type of video signals to be output on the SDI OUT and
VF connectors can be selected. The settings are common
to each connector.
You select the signal on the <VF/SDI Signal> page
in the VF/SDI menu.
Output signal when connected to SR-R4
The SR-R4 playback image is automatically output when
playback is started on the SR-R4. When playback is
stopped on the SR-R4, the output reverts to the camera
image.
<VF/SDI Signal> page
Effective Area
Selects the output image.
4096:2160:
Outputs the entire recorded image.
3840:2160:
Outputs an image with 16:9 aspect ratio.
Anamorphic Unsqueeze x2:
Outputs an undistorted
image, with surplus areas, when using a 2x
anamorphic lens.
Color
Selects the output channel.
Color:
Outputs all RGB channels.
R:
Outputs the R channel only.
G:
Outputs the G channel only.
B:
Outputs the B channel only.
Scan Type (Over 30p)
Selects whether to output images for reduced distortion of
fast-moving subjects when Frame Rate is set to 50p or
higher.
Interlace:
Interlaced output at normal settings.
Frame Drop:
Outputs signal with dropped frames to
reduce the distortion of fast-moving subjects when
Frame Rate is set to 50p or higher. Some motion
smoothness is sacrificed in return for reduced
distortion.
Image Invert Select
Selects the type of image inversion.
Off:
No inversion
Vertical
Horizontal
Vertical & Horizontal