manualshive.com logo in svg

Sony EVI-D100 (NTSC), Service Manual, Page: 9 / 128

Share
Download
Sony EVI-D100 (NTSC) Service Manual Download Page 9

5

EVI-D100/EVI-D100P

Manual Structure

Purpose of this manual

This manual is the Service Manual of the Color Video Camera EVI-D100/D100C/
D100CP/D100P.

This manual contains the adjustments, circuit functions, semiconductor pin
assignments, spare parts and diagrams.

Related manuals

In addition to this Service Manual the following manual is provided.

.....

Operating Instructions

This manual describes the information required for the actual management and
operation of this unit.

.....

“Semiconductor Pin Assignments” CD-ROM (Available on request)

This “Semiconductor Pin Assignments” CD-ROM allows you to search for
semiconductors used in Broadcast and Professional equipment.

Part number: 9-968-546-06

Trademarks

Trademarks and registered trademarks used in this manual are as follows.

.

 MS-DOS and Windows are registered trademarks of Microsoft Corporation.

Summary of Contents for EVI-D100 (NTSC)

































































































































Reviews:

No comments