Sony ERS-1000, Help Manual

Page: 9 / 115

Help Guide
ENTERTAINMENT ROBOT
ERS-1000
Features on aibo's body surface (Button, LEDs, Pins)
Indications of the network LEDs
Wi-Fi network LED
Status LED
Indicates the state of aibo. See
Checking the status LED for the state of aibo for more information.
1.
Power button
Turns on aibo or puts aibo in sleep mode.
2.
Charging pins
Pass through power for charging aibo's built-in battery while in contact with the charge connector on the charging
stand.
3.
Wi-Fi network LED
Indicates the state of the connection between aibo and a Wi-Fi network. See the following table for the LED
indications.
4.
Mobile network LED
Indicates the state of the connection between aibo and your mobile network. See the following table for the LED
indications.
5.
Indication State
Lit in green aibo is connected to the Internet through a Wi-Fi network.
Flashing in green
aibo fails to establish a connection to a Wi-Fi network.
The settings for connecting to the Wi-Fi router/access point may not be properly configured.
Check the Wi-Fi router/access point for power supply or LAN cable connection.
Flashing in red
The attempt to connect to a Wi-Fi network with Wi-Fi Protected Setup™ button failed.
Check the Wi-Fi router/access point for its state and repeat the connection procedure with
the Wi-Fi Protected Setup™ button all over again.
Flashing alternately in
green and red
aibo is waiting for a connection to a Wi-Fi network to be established.
9