SEL1855 (E 18-55mm F3.5-5.6 OSS)
2-5
Grease (FT-210): 9-913-200-37
1. Turn Zoom Linkage Pin to OVER TELE.
2. Move Slide Var Rec Boss to Mount side of the camera.
3. Apply grease (FT-210) to the groove on Zoom Cover Assy.
4. Assemble Zoom Cover Assy by fitting the grooves with Zoom Linkage Pin and Slide Var Rec.
5. Turn Zoom Cover Assy to WIDE. (Counterclockwise, viewed from Mount side)
1. Turn Zoom Cover Assy of Fixed Hold Barrel Assy to WIDE without catching the flexible board.
2. Insert the flexible board of 3 Group Lens Assy into Zoom Cam Barrel Assy while passing it through the hole of Fixed Hold Barrel Assy.
3. Turn Zoom Cover Assy to WIDE without catching the flexible board.
4. Insert the two FPC Holder plate into the grooves on Fixed Hold Barrel Assy.
Note:
Make sure that the tip of the FPC Holders Plate is in the groove on Fixed Hold Barrel Assy.
Take notice that 3 Group Lens Assy may drop off if turn Zoom Cover Assy until it is in OVER TELE.
Mount side of the camera
Slide Var Rec Boss
Zoom Cover Assy
Zoom Cover Assy
Zoom Cover Assy
Groove
Zoom Linkage Pin
Apply grease (FT-210)
FPC Holder Plate
Zoom Cover Assy
