19
Adjusting the White Balance
Each time the lighting conditions change, adjust the white
balance so that optimal color reproduction is obtained.
Operation procedure
1
Place a white object in the same light as that falling on
the subject to be shot, then shoot in on the whilte object
on the full screen. Avoid very bright highlights within
the area.
The white object can be a piece of white paper or cloth,
a white wall, or the like.
Notes
• Don’t include highly reflective items in the picture.
• Always shoot the image under suitable lighting conditions.
2
Press the AUTO WHITE button on the front panel of
the camera control unit for more than one second. (This
procedure is for when the menu is not displayed.)
The message “OK” appears on the screen when the
adjustment is done.
The adjusted white level is automatically stored in
memory and remains, even if the camera’s power is
turned off.
To shoot under the same condition, the stored white
balance is reproduced with the “W. B.” on the PAGE 2
menu set to “AWB”.
(continued)
AUTO
WHITE
Summary of Contents for DXC-LS1P
