9
Parts Identification
d
Accessory connector
Use to connect the receiver to a camcorder
or DWA-01D/F01D wireless adapter.
Power, audio, and control signals are sent
through this connector.
e
POWER indicator
Lights up green when the power is on.
The POWER1 and POWER2 indicators
indicate the power status of tuner 1 and
tuner 2, respectively.
f
USB connector
Connecting an optional keyboard to this
connector allows menu operation to be
performed on the keyboard. Connecting the
transmitter to this connector through the
supplied USB cable allows an encryption
key to be exchanged with the transmitter.
For details on the use of a USB keyboard, see
“Using a USB Keyboard” on page 16.
For details on encryption key exchange, see “Using
the Encrypted Transmission Function” on page 14.
g
RF (radio frequency) indicators
Indicate the RF input level of tuner 1 and
tuner 2.
The indicators that light up depend on the
RF squelch function setting as follows:
When the RF (radio frequency) squelch
level is set to OFF:
On in green:
25 dBµ or more
On in red:
15 dBµ to 25 dBµ
Off:
Less than 15 dBµ
When the RF (radio frequency) squelch
level is set to 20 dBµ:
On in green:
30 dBµ or more
On in red:
20 dBµ to 30 dBµ
Off:
Less than 20 dBµ
h
POWER switches
Turn tuner 1 and tuner 2 on or off
individually.
i
MENU SELECT (menu selection)
button
Selects the displayed menu.
j
SET button
Changes the item to be set or enters the
selected function or parameter value.
k
+ or – button
Use to select a function or value.
If you set the POWER switch on tuner 1 or
tuner 2 to ON while holding down the +
button, the tuner that you turned ON will
begin the scanning operation of the clear
channel scan function.
If you set the POWER switch on tuner 1 or
tuner 2 to ON while holding down the –
button, the tuner that you turned ON will
begin the pairing operation of the wireless
remote control function.
l
Display section
A
Audio input level meter
Indicates the input signal level.
B
Reference level gage
Indicates the reference input level.
–58 dBu (–60 dBV) is indicated when the
input level is set to “MIC” on the
transmitter, and +4 dBu when the input
level is set to line.
C
Peak indicator
Warns of excessive input by lighting up
when the signal is 3 dB below the level at
which distortion begins.
Meter display
Summary of Contents for DWRS02D/14
Page 36: ...Sony Corporation ...
