31
Troubleshooting
Wireless
remote
control is not
possible.
Pairing has not been established
between the transmitter and
receiver.
Carry out pairing (see page 24).
The receiver is too far from the
transmitter for communication to
occur.
Check the condition level. If it is low,
decrease the distance between the
transmitter and the receiver.
The transmitter that was paired
with the receiver has been paired
with another receiver.
Carry out pairing again with the
transmitter that you want to control.
The software version of the
transmitter is not suitable for use
with this receiver.
Refer to the transmitter software
compatibility table, and confirm
whether the software version of the
transmitter is suitable for use with
this receiver (see page 32). If it is
not suitable, software update is
necessary. Contact your Sony
service representative.
The USB
keyboard
does not
work.
You are using a USB keyboard
that is not compatible with the
receiver.
Check the conditions for using a
USB keyboard with the receiver
(see page 16).
The display is
too dark.
The display brightness is set to
low.
Adjust the brightness of the display
(see page 20).
Symptom
Meanings
Remedy
Summary of Contents for DWRS02D/14
Page 36: ...Sony Corporation ...
