Sony DWR-R02D Operating Instructions Manual Download

Page: 6 / 45

Table of Contents

Table of Contents

Features .......................................................8

Using the CD-ROMs ....................................9

Supplied CD-ROM “Wireless Studio” ......... 9
Supplied CD-ROM “Digital Wireless

Receiver”........................................... 10

Trademarks ................................................. 10

Parts Identification ....................................11

Front Panel.................................................. 11
Rear Panel ................................................... 14

Preparation ................................................16

Rack Mounting ........................................... 16

System Configuration Examples .............17

Using the Supplied Antennas...................... 17
Configuration Example of Multi-Channel

System ............................................... 19

Configuration Example of ST Remote

System ............................................... 22

Configuration Example of NT Remote

System ............................................... 23

Setting the Receiving Channel.................24

Selecting the Group/Channel...................... 24
Using the Active Channel Scan Function... 24
Using the Clear Channel Scan Function..... 25

Using the Encrypted Transmission

Function ..............................................26

Using Secure Key Mode

(SECURE KEY)................................ 26

Using Password Mode (PASSWORD)....... 26

Menu Displays and Detailed Settings......27

Menu Structure and Hierarchy.................... 27
Basic Menu Operations............................... 27

RECEIVER Menu........................................28

Group/channel Selection (GP/CH) ............. 28
Active Channel Scanning Function (ACTIVE

CH SCAN) ........................................ 28

Clear Channel Scan Function (CLEAR CH

SCAN)............................................... 28

Encrypted Transmission Function

(ENCRYPTION)............................... 29

Setting Analog Audio Output Level (BAL

OUT LEVEL).................................... 29

Setting the Attenuator for the Analog

Unbalanced Output (UNBAL OUT
ATT).................................................. 29

Ground Lift Function (GROUND LIFT).... 29

TRANSMITTER (Transmitter Virtual)

Menu ....................................................29

Display of the Transmitter Name

(NAME) ............................................ 29

Display of the Power Save Setting (POWER

SAVE) ............................................... 30

Display of the Transmission Power Setting

(RF POWER) .................................... 30

Display of Audio Input Level (INPUT

LEVEL) ............................................. 30

Display of the Attenuator (ATT) ................ 30
Display of the Low-cut Filter Setting

(LCF) ................................................. 30

Display of the +48 V Power Setting

(+48V) ............................................... 30

Display of Accumulated Transmitter Use

Time (TIME) ..................................... 30

Display of Internal Signal Generation

(INTERNAL SG) .............................. 30

POWER Switch Lock (PWR SW

LOCK)............................................... 30

POWER Switch Status (PWR SW

STATE) ............................................. 30

RF REMOTE Menu.....................................30

Using the Cross Remote (RF REMOTE) ... 30
Pairing With a Transmitter (PAIRING) ..... 30
Displaying the Remote Mode (MODE)...... 32

UTILITY Menu ............................................32

Items Related to Signal Reception (RF

submenu) ........................................... 32

Items Related to Audio (AUDIO

submenu) ........................................... 33

Items Related to Network (NETWORK

submenu) ........................................... 33

Items Related to Alerts (ALERT FUNCTION

submenu) ........................................... 33

Items Related to Display (DISPLAY

submenu) ........................................... 34

Resetting Parameters to Their Factory Settings

(FACTORY PRESET) ...................... 34

Displaying the Software Version

(VERSION) ....................................... 34

Changing the Settings on the

Transmitter..........................................35

Group/channel Setting (GP/CH)................. 35
Transmitter Name Setting (NAME) ........... 35
Power-saving Setting (POWER SAVE) ..... 35

Summary of Contents for DWR-R02D














































Search results

Summary of Contents for DWR-R02D

Reviews:

Related manuals for DWR-R02D

Brands by name

Popular brands

Sony DWR-R02D, Operating Instructions Manual

Search results

Summary of Contents for DWR-R02D

Reviews:

Related manuals for DWR-R02D

Brands by name

Popular brands