32
UTILITY Menu
Displaying the Remote Mode
(MODE)
Display whether the receiver is operating in the ST remote
or NT remote mode. (The mode can only be displayed.)
NT:
The receiver has recognized the RMU-01 unit and is
operating in NT remote mode.
ST:
The receiver is operating in ST remote mode.
SEARCH:
The receiver is searching for the remote mode
state.
UTILITY Menu
For details on menu operation, see “Basic Menu
Operations” on page 27.
The UTILITY menu includes items related to the basic
receiver settings, including displays.
In this section, the functions included in the menu and their
parameters are explained.
Underlined items are the factory settings.
The following shows the US model display.
All the items in the UTILITY menu can be set by using the
controls on the receiver channel 1. The UTILITY menu
settings are applied to both receiver channels.
Items Related to Signal Reception
(RF submenu)
Frequency band setting
(BAND)
Selects the frequency band that the transmitter uses.
See “Carrier Frequencies and Channel Steps” on page 44
for factory settings.
Antenna attenuator setting
(ANT ATT a/b)
Sets the attenuator for the antenna input.
This item can be set independently for each of the
ANTENNA IN connectors.
0dB/5dB/10dB
When connecting DWR-R02D units in cascade, set ANT
ATT a/b to “0dB” on any DWR-R02D unit that is not
directly connected to the antenna.
DC power supply setting for antennas
(ANT
DC OUT)
Sets the power supply for the antennas connected to the
ANTENNA a/b IN connectors.
Note
Note
Function name
Item to be set
Summary of Contents for DWR-R02D
Page 45: ......
