9
Parts Identification
Parts
Identification
a
Microphone capsule unit (not
supplied)
Mount the microphone capsule unit
securely.
Make sure that the wireless microphone is
turned off before mounting or removing the
microphone capsule unit.
Mounting or removing the unit while the
wireless microphone is turned on may result
in malfunctions.
For details on mounting, refer to the operating
instructions supplied with your microphone capsule
unit.
b
Grip
Contains operation buttons, display section,
and the battery holder.
Open the grip to make settings or install the
batteries.
For details on how to open the grip, see “Installing
the Batteries” on page 11.
When the grip is open, the metal part of the
grip obstructs the antenna for RF
transmission and wireless remote control
system. To transmit the signal or to use the
wireless remote control function with this
microphone, be sure to close the grip.
c
Identification ring
The ring can be replaced with the ones
supplied.
This is useful when multiple microphones
are used in the system.
For details on how to replace the identification ring,
see “Replacing the Identification Ring” on page 12.
d
Antenna cover
Holds the antenna for RF transmission and
wireless remote control function.
e
POWER indicator
Lights up green when the microphone is
turned on. When the battery is exhausted,
the indicator starts flashing.
f
USB connector (Micro USB)
Use this connector to connect an optional
USB keyboard to carry out menu functions
using key operations.
By connecting the digital wireless receiver
to this connector with the supplied USB
cable, you can exchange the encryption key
for encrypted transmission function.
g
+ or – button
Selects functions or values shown on the
display.
Note
Inside the
grip
Front
Side
Bottom of
the antenna
cover
Note
