Sony DVS-7200 Product Manual Download Page 103

Page: 103 / 130

SONY

DVS-7200 • Product Guide

Installation Guide

••

DVS-7200 with ScitexDV (Abekas) Dveous A-5100

The simplified diagram below shows a typical interconnection between a DVS-7200
and a ScitexDV Dveous A-5100.

Control Panel

BKDS-7015

Tally Interface Unit

BKDS-7700

Processor

DVS-7200

Control Panel Cable

(Scitex supplied)

A-5100 Control Panel

Control

Video/Key

Tally/GPI Cable

(Customer supplied)

GPI

Editor RS-422

Aux RS-422

Tally In/GPI

DME 1-4 RS-422

Remote 1-4

RS-422

Ref.

Key In

Video In

Aux 4 Out

Aux 3 Out

Aux 2 Out

Aux 1 Out

In 1A

In 1B

In 2A

In 2B

Video Out

Key Out

A-5100 Processor

Note the following important points regarding the system shown above:

•

The DVS-7200 control panel remote port is configured for P-II
protocol.

•

The Dveous editor port is configured for P-II protocol. Refer to the
Dveous User’s Guide for details.

•

The Dveous Aux port is configured for Sony Aux bus protocol. Refer
to the Dveous User’s Guide for details.

Summary of Contents for DVS-7200



































































































































Search results

Summary of Contents for DVS-7200

Reviews:

Related manuals for DVS-7200

Brands by name

Popular brands

Sony DVS-7200, Product Manual

Search results

Summary of Contents for DVS-7200

Reviews:

Related manuals for DVS-7200

Brands by name

Popular brands