1-19
78
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
•
Depending on the units being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
•
If you enter a new code number, the code number
previously entered will be erased.
•
When you replace the batteries of the remote, the
code number you have set may be reset to the default
setting. Set the appropriate code number again.
1
Slide the TV/DVD switch to TV.
2
While holding down
[
/
1
, press down on
the scroll key.
“
TV P-1
”
appears in the LCD screen.
3
Release
[
/
1
.
4
Toggle the scroll key up or down to
select your TV
’
s manufacturer
’
s code
(see the table below).
5
Press down on the scroll key.
The manufacturer
’
s code flashes and the
remote is set.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Controlling TVs with the remote
[
/
1
VOL +/–
TV/VIDEO
Number
buttons
TV/DVD
switch
CH +/–
WIDE MODE
ENTER
LCD screen
Scroll key
Manufacturer Code
number
Sony (default)
1
Akai
4
AOC
4
Centurion
12
Coronado
3
Curtis-Mathes
12
Daytron
12
Emerson
3,4,14
Fisher
11
General Electric 6,10
Gold Star
3,4,17
Hitachi
2,3
J.C.Penney
4,12
JVC
9
KMC
3
Magnavox
3,8,12
Marantz
4,13
MGA/
Mitsubishi
4,12,13,
17
NEC
4,12
Panasonic
6,19
Philco
3,4
Philips
8,21
Pioneer
16
Portland
3
Quasar
6,18
Radio Shack
5,14
RCA
4,10
Sampo
12
Samsung
20
Sanyo
11
Scott
12
Sears
7,10,11
Sharp
3,5,18
Sylvania
8,12
Teknika
3,8,14
Toshiba
7
Wards
3,4,12
Yorx
12
Zenith
15
Manufacturer Code
number
Using Var
ious
Addition
a
l Functions
79
Controlling the TV
When you set the TV/DVD switch to TV, you
can control the following items with the
supplied remote.
1
Slide the TV/DVD switch to DVD.
2
While holding down
[
/
1
, press down on
the scroll key.
“
AV P-90
”
appears in the LCD screen.
3
Release
[
/
1
.
4
Toggle the scroll key up or down to
select your AV amplifier (receiver
’
s)
manufacturer
’
s code (see the table
below).
5
Press down on the scroll key.
The manufacturer
’
s code flashes and the
remote is set.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
If you do not connect an AV amplifier
(receiver), you can control your TV
’
s volume
by setting the code number to 90 (default).
However, you must first set the code number
of controllable TVs as explained above.
Controlling the AV amplifiers
(receivers)
When you set the TV/DVD switch to DVD,
you can control the volume of the AV
amplifier (receiver) using VOL
+/–
.
By pressing
You can
[
/
1
Turn the TV on or off
VOL +/
–
Adjust the volume of the TV
WIDE MODE
Switch to or from the wide
mode of a Sony wide TV
TV/VIDEO
Switch the TV
’
s input source
between the TV and other input
sources
CH +/
–
, number
buttons, and
ENTER
Select the channel of the TV
Controlling the volume of your AV
amplifier (receiver) with the remote
[
/
1
VOL +/–
TV/DVD
switch
LCD screen
Scroll key
Manufacturer
Code number
Sony
80, 88, 89, 91
Denon
84, 85, 86
Kenwood
92, 93
Onkyo
81, 82, 83
Pioneer
99
Sansui
87
Technics
97, 98
Yamaha
94, 95, 96
80
Settings and Adjustments
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item, see page 81. For an overall list
of Setup Display items, see page 103.
Note
Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
1
Press DISPLAY when the player is in
stop mode.
The Control Menu appears.
2
Press
X
/
x
to select
(SETUP),
then press ENTER.
The options for
“
SETUP
”
appear.
3
Press
X
/
x
to select
“
CUSTOM,
”
then
press ENTER.
The Setup Display appears.
4
Press
X
/
x
to select the setup item from
the displayed list:
“
LANGUAGE SETUP,
”
“
SCREEN SETUP,
”
“
CUSTOM SETUP,
”
“
AUDIO SETUP,
”
or
“
SPEAKER SETUP.
”
Then press ENTER.
The selected Setup item appears.
Example:
“
SCREEN SETUP
”
5
Select an item using
X
/
x
, then press
ENTER.
The options for the selected item appear.
Example:
“
TV TYPE
”
How to use the Setup Display
DISPLAY
X
/
x
ENTER
( 47 )
: :
QUICK
CUSTOM
RESET
DVD VIDEO
STOP
QUICK
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
ON
JACKET PICTURE
MODE:
AUTO
STARTUP SCREEN:
COMPONENT OUT:
INTERLACE
STANDARD
Selected item
Setup items
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
STARTUP SCREEN:
16:9
COMPONENT OUT:
INTERLACE
MODE:
AUTO
4:3 LETTER BOX
Options
S
e
tt
ings a
nd Adjustments
81
6
Select a setting using
X
/
x
, then press
ENTER.
The setting is selected and setup is complete.
Example:
“
16:9
”
To turn off the Setup Display
Press DISPLAY repeatedly until the Setup
Display is turned off.
z
If you select
“
QUICK
”
in Step 3, you will enter the
Quick Setup mode (page 31). Follow from Step 5 of
the Quick Setup explanation to make basic
adjustments.
z
If you select
“
RESET
”
in Step 3, you can reset all
of the
“
SETUP
”
settings on page 103 to 106 to the
default settings. After you select
“
RESET
”
and press
ENTER, select
“
YES
”
and press ENTER to reset the
settings (it takes a few seconds to complete), or select
“
NO
”
and press ENTER to return to the Control Menu.
Do not press POWER or
[
/
1
when resetting the
player.
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
“
LANGUAGE SETUP
”
allows you to set
various languages for the on-screen display
or sound track.
Select
“
LANGUAGE SETUP
”
in the Setup
Display. For details on using the display, see
“
Using the Setup Display
”
(page 80).
x
OSD (On-Screen Display)
Switches the display language on the screen.
Select the language from the displayed list.
x
MENU (DVD VIDEO only)
You can select the desired language for the
disc
’
s menu.
x
AUDIO (DVD VIDEO only)
Switches the language of the sound track.
Select the language from the displayed list.
When you select
“
ORIGINAL,
”
the language
given priority in the disc is selected.
x
SUBTITLE (DVD VIDEO only)
Switches the language of the subtitle
recorded on the DVD VIDEO.
Select the language from the displayed list.
When you select
“
AUDIO FOLLOW,
”
the
language for the subtitles changes according
to the language you selected for the sound
track.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
MODE:
AUTO
STARTUP SCREEN:
COMPONENT OUT:
INTERLACE
STANDARD
Selected setting
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
ENGLISH
ENGLISH
ORIGINAL
ENGLISH
continued
