Sony DVP-NS315 Operating Instructions Manual Download Page 20

Page: 20 / 72

Step 2: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.

Select a connection

Select one of the following connections,

through

* Manufactured under license from Dolby

Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.

** “DTS” and “DTS Digital Out” are trademarks

of Digital Theater Systems, Inc.

Components to be connected

Connection

(page 21)

Stereo amplifier (receiver)

(having L and R audio input jacks only, or having a digital input jack)
• 2 speakers

(front L and R)

(page 22)

MD deck/DAT deck

(page 22)

AV amplifier (receiver) with a Dolby

Surround (Pro Logic)

decoder

(having L and R audio input jacks only, or having a digital input jack)
• 3 speakers

(front L and R, and rear (monaural))

or
• 6 speakers

(front L and R, center, rear L and R, subwoofer)

(page 23)

AV amplifier (receiver) having a Dolby Digital or DTS

decoder

and a digital input jack

• 6 speakers

(front L and R, center, rear L and R, subwoofer)

(page 24)

Summary of Contents for DVP-NS315









































































Search results

Summary of Contents for DVP-NS315

Reviews:

Related manuals for DVP-NS315

Brands by name

Popular brands

Sony DVP-NS315, Operating Instructions Manual

Search results

Summary of Contents for DVP-NS315

Reviews:

Related manuals for DVP-NS315

Brands by name

Popular brands