Sony DVP-C653D, Service Manual, Page: 5 / 103

– 5 –
4. NOTE ON MOUNTING GEARS
1) Mount the gear (U/D). (See Fig. 3.)
2) Rotate the gear (U/D) in the direction of the arrow.
(down position) (See Fig. 3.)
3) Align triangle marks of the rotary encoder. (See Fig. 4.)
4) Escape the set lever. (See Fig. 4.)
5) Connect the boss of the gear (main) with the groove of the
rotary encoder and mount the gear (main). (See Fig. 4.)
6) Mount the lock lever (See Fig. 5.)
7) Mount the spring (lock lever). (See Fig. 5.)
8) Rotate the gear (main) in the direction of the arrow
A
by 90
°
turn. (Gear (U/D) is up position.) (See Fig. 6.)
9) Mount the Gear (rev). (See Fig. 6.)
10) Fix three stopper washers on the groove of shafts.
(See Fig. 6.)
Gear (U/D)
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Spring
(lock lever)
Spring
(lock lever)
Lock lever
Lock lever
Gear
(main)
Gear (main)
Set lever
Boss
Groove
Rotary encoder
Align triangle marks.
BU
Shaft
Stopper washer
Gear (rev)
Gear (main)
Gear (U/D)
Two stopper
washers
Groove
* *
*
A