Sony DVCAM DSR-PD100A Operating Instructions Manual Download

Page: 17 / 148

Basic operations

Notes on the LCD panel

• When closing the LCD panel, turn it vertically until it clicks

[a]

• When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may

be damaged or the LCD panel may not close properly

[b]

• Close the LCD panel completely when not in use.
• Do not push nor touch the LCD panel while operating the camcorder.
• You may find it difficult to view the LCD screen due to glare when using the camcorder

outdoors.

Letting the subject monitor the shot

You can turn the LCD panel over so that it faces the other way and you can let the subject
monitor the shot while shooting with the viewfinder.

Turn the LCD panel up vertically. When you turn the LCD panel 180 degrees, the
indicator appears on the LCD screen

(mirror mode)

and the time code and remaining tape

indicators disappear.
You can also use the Remote Commander.

To cancel mirror mode

Turn the LCD panel down toward the camcorder body.

Camera recording

[a]

[b]

Summary of Contents for DVCAM DSR-PD100A





















































































































































Search results

Summary of Contents for DVCAM DSR-PD100A

Reviews:

Related manuals for DVCAM DSR-PD100A

Brands by name

Popular brands

Sony DVCAM DSR-PD100A, Operating Instructions Manual

Search results

Summary of Contents for DVCAM DSR-PD100A

Reviews:

Related manuals for DVCAM DSR-PD100A

Brands by name

Popular brands