69
Menu Contents
Ch
ap
te
r 6
Men
u
Set
tin
g
INT AUDIO SG [> Audio SG]:
Select the operation of the
internal audio test signal generator.
SILENCE [>> silence]:
Silent signal
*
1kHz SINE [>> 1kHz]:
1-kHz,
−
20 dB FS (for DSR-
DR1000A) or
−
18 dB FS (for DSR-DR1000AP) sine wave
signal
When you select SG (audio test signal) as the audio input in
the video/audio input setting section on the front panel, the
audio test signal generated by the internal audio test signal
generator is input.
JOG CONTROL [> Jog ctrl]:
Select whether to adjust the
audio playback speed during slow playback.
OFF [>> OFF]:
Do not adjust the audio playback speed.
*
ON [>> ON]:
Adjust the audio playback speed.
SHUTTLE MUTE [> Shutl mute]:
Set the audio muting
conditions during shuttle playback.
*
OFF [>> OFF]:
Not muted.
CUEUP or PREROLL [>> CUEUP]:
Muted during cue-up or
preroll operations.
FULL [>> FULL]:
Muted in shuttle mode.
DV ATT [> DV PB ATT]:
When playing back a clip recorded in
consumer DV format, select whether to attenuate the audio
output level.
OFF [>> OFF]:
Do not attenuate.
*
ON [>> ON]:
Attenuate.
INTERFACE SELECT [Interface]: Settings related to
external interfaces
Description of settings
VIDEO OUTPUT [> Video Out]:
Select the four format of
analog video signals to be output from the four VIDEO
OUT connectors (Y/CPST, R
−
Y/S
−
C, B
−
Y/S
−
C and
SUPER).
Note
When this menu item is set to Y
−
R, B, the SUPER connector
outputs the B
−
Y signal. In this case, changing the setting of an
internal switch allows the text data for superimposition on the
monitor screen to be output from the right-hand REF. VIDEO IN
connector (marked
). For more information about this,
consult your Sony dealer.
*
COMPOSITE [>> Composite]:
Composite video signals
S-VIDEO [>> S-Video]:
S-video (separated Y and C) and
composite video signals
Y–R, B [>> Y–R, B]:
Y, R
−
Y and B
−
Y component video
signals
AUDIO OUTPUT [> Audio Out]:
Select the channels for audio
output from the AUDIO OUT 1/3 and 2/4 connectors.
*
1/2 CH [>> 1/2CH]:
Output channel 1 to the AUDIO OUT 1/3
connector and channel 2 to the AUDIO OUT 2/4
connector.
3/4 CH [>> 3/4CH]:
Output channel 3 to the AUDIO OUT 1/3
connector and channel 4 to the AUDIO OUT 2/4
connector.
REMOTE I/F [> Remote I/F]:
When remote-controlling this unit
with the control mode selector set to REMOTE, select
either the REMOTE IN (R)/OUT (P) connector or
S400(i.LINK) connector for connecting a remote control
unit.
i.LINK [>>i.LINK]:
Device connected to S400(i.LINK)
connector.
*
9PIN [>>9PIN]:
Device connected to REMOTE IN(R)
connector. Do not use REMOTE OUT(P) connector.
9PIN(PARA) [>>9P Para]:
Make cascade connection
between multiple units of this recorder using the REMOTE
IN(R) and REMOTE OUT(P) connectors, controlling all
recorders remotely from one recorder.
9PIN(DUAL) [>>9P Dual] :
Control recording remotely from
device connected to REMOTE IN(R) connector. Control
playback remotely from device connected to REMOTE
OUT(P) connector.
PC REMOTE [>PC REMOTE]:
Select whether or not to enable
control from a computer
*
DISABLE [>>DISABLE]:
Disable.
ENABLE[>ENABLE]:
Enable.
AUDIO CONTROL [Audio]: Settings related to audio
control
Description of settings