6
1
1
2
2
3
1
3
1
75
Z
co-axial cable (optional)
2
9-pin remote cable (5 meter long, supplied)
3
RCA plug (optional)
DSR-60/60P
DSR-80/80P
(player)
QSDI OUT
DSR-80/80P
(recorder)
QSDI IN
REF. VIDEO
OUT
MONITOR
AUDIO
VIDEO
OUT 2
(SUPER)
REMOTE
MONITOR
AUDIO
VIDEO
OUT 2
(SUPER)
REMOTE
Audio input
Composite video input
Source monitor
PLAYER
REF. VIDEO IN
Editing control unit
RM-450/PVE-500 (editing side)
RECORDER
Main monitor
Audio input
Composite video input
When ASSEMBLE edit or INSERT edit is selected
at the editor, the EDIT MODE indicator on the
front panel of DSR-80/80P (recorder) lights,
entering the editing mode automatically.
88:88:88:88
88:88:88:88
88:88:88:88
888
Switch
Recorder
Player
REMOTE/LOCAL
REMOTE
REMOTE
Connection for Cut Editing System
Connection example of the cut editing system when DSR-60/60P is connected with DSR-80/80P or DSR-80/80P is connected with another
DSR-80/80P is shown below.
.
Refer to the Operating Instructions of other equipment at the same time for connection.
Switch setting of DSR-80/80P/60/60P (player) and DSR-80/80P (recorder)
.
Refer to the Operating Instructions of DSR-80/80P for video/audio input of recorder and for audio mode setting.
Note : When the QSDI interface is used for the connection, monitor of the JOG audio cannot be switched to the recorder
monitor even through recorder enters the E-E mode. Therefore, monitor the JOG audio at the player side.
About the reference video signal
The reference video signal which is synchronized with the video signal in use, is necessary and must be input to the REF. VIDEO IN
connector for analog signal editing in order that the built-in TBC works correctly and the stable picture and audio are obtained.
