5
8. CONNECTION OF EDITING EQUIPMENT, AND INPUT/OUTPUT SIGNALS OF CONNECTORS
8-1. Connection of Editing Equipment
Connection for Digital Non-Linear Editing System
The digital non-linear editing system can be configured by connecting between DSR-80/80P/60/60P and the edit station ES-7.
Use of the QSDI interface (optional board as to DSR-60/60P) enables transfer of the compressed data such as video, audio and timecode from
DSR-80/80P/60/60P to ES-7.
DSR-80/80P/60/60P supports the ClipLink function. The index picture which is recorded on tape and the ClipLink log data which is stored
in the cassette memory can be transferred immediately to ES-7.
.
Refer to “ClipLink™ Guide” supplied with the unit for general description of ClipLink functions.
Connection example of digital non-linear editing system when DSR-80/80P is used as a recorder and DSR-60/60P as a player, is shown
below.
.
Refer to the Operating Instructions supplied with ES-7 for the connection procedure of the peripheral equipment (such as control panel
ESBK-7011, disk unit ESBK-7045, etc.,) of ES-7.
Note : In this connection example, DSR-80/80P/60/60P is equipped with the optional board DSBK-100/100P/110/110P/
120/120P/130/130P.
DSR-80/80P/60/60P setting
* : DSR-80/80P only
Switch
Setting
REMOTE/LOCAL
REMOTE
REF. VIDEO IN terminated in 75
Z
ON
1
1
1
2
3
REF. VIDEO IN
QSDI OUT
B B OUT (1/2/3/4)
QSDI OUT
QSDI IN
PLAYER
MONITOR
AUDIO
VIDEO OUT 2
(SUPER)
DSR-80/80P (Recorder)
DSR-60/60P (Player)
REMOTE
Edit station ES-7
Audio input
Composite video input
Video monitor
1
75
Z
co-axial cable (optional)
2
9-pin remote cable (5 meter long, supplied)
3
RCA plug (optional)
1
*