46
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
Connecting the DSR-70/70P Digital Videocassette Recorder
DSR-300A/300AP
DV OUT
i.LINK cable (DV connecting cable)
DV IN
DSR-70/70P Digital
Videocassette Recorder
Notes
• The camcorder does not support noiseless various
speed playback.
• To protect the tape, slow playback is automatically
cancelled if the slow playback lasts for about one
minute.
• When dubbing tapes using the DSR-70/70P, a
continuous recorded section of approximately five
seconds is required before the recording start point. It
is recommended to record color bars or a similar
signal beforehand at the start point of the source tape
to be dubbed on this unit.
Connecting an External VCR
You can connect the following external VCRs to the
VTR connector (26-pin) or the DV OUT connector for
recording.
Notes
• There is no power supply connection between the
camcorder and VCR. Provide separate power
supplies.
• The VTR connector always outputs the signals from
the camera. (The playback video of the internal VCR
cannot be output. Also, a CCU connection cannot be
made.
• When no VCR is connected to the VTR connector
(26-pin), it does not supply signals.
VCR
Connecting cable
BVW-50/50P/35/
35P (portable)
CCZ-A Camera
cable (max. length
10 m (33 ft.))
VO-8800/6800
(U-matic)
CCZQ-A Camera
cable (max. length
10 m (33 ft.))
Connector
VTR connector
VTR connector
DV OUT
connector
Digital
Videocassette
Recorder DSR-
20/20P/70/70P/
2000/2000P, etc.
i.LINK cable (DV
connecting cable)
(max. length
4.5 m (14 ft.))
Connections
You can do cut editing and digital dubbing by
connecting the DSR-70/70P with the optional DSBK-
140 fitted, using an i.LINK cable (DV connecting
cable).
DSR-300A/300AP begins recording when the DSR-
70/70P or other recorder sends a REC command.
