Chapter 3 Adjusting and Setting Through Menus
Chapter 3
Adjusting and Setting Through Menus
41
(GB)
Chapter
3
Adjusting and Setting
Through Menus
Operating the Menus
VTR SET
REC MODE
FF / REW SPD
ST I LL T I ME
FROM ST I LL
FROM REC P
DV EE OUT
ST I LL P I CT
[MENU] : END
VTR
A
DISP
CM
ETC
The unit allows you to set various parameters in the
menus. Before you start using the unit, set the internal
clock in CLOCK SET on the OTHERS menu. Except
for clock setting, you can use all other factory-set
default parameters but change them as needed.
Note
If the internal backup battery is exhausted, the menu
settings will be initialized. The internal backup battery
is fully charged if you connect the power to the unit
for about 10 hours. The menu settings will be kept for
about one month.
Displaying the menu
Press the MENU button on the Remote Commander.
The menu is superimposed on the analog video output.
Changing the menu settings
1
Pressing the
M
/
m
buttons on the Remote
Commander, select the menu icon you want to
change, then press the SET button on the Remote
Commander.
2
Pressing the
M
/
m
buttons, select the submenu you
want to change, then press the SET button.
3
Pressing the
M
/
m
buttons, change the setting.
4
Press the SET button to return to the submenu.
5
Repeat steps
2
to
4
, as needed.
To return to step 1
Pressing the
M
/
m
buttons, select
RETURN, then
press the SET button.
To exit from the menu
Press the MENU button again.
Icons
Submenus
