manualshive.com logo in svg

Sony DSLR-A100K - alpha; Digital Single Lens Reflex Camera, Operating Instructions Manual

Share
Download
Sony DSLR-A100K - alpha; Digital Single Lens Reflex Camera Operating Instructions Manual Download Page 138

138

Image protected.

•

You tried to delete protected images. 
Release the protection.

Unable to print.

•

You tried to mark RAW images with a 
DPOF set mark.

Initializing
 USB connection.

•

A USB connection has been 
established. Do not disconnect the USB 
cable.

USB connection error

•

A USB connection cannot be 
established. Disconnect the USB cable 
and connect it again.

Error. Check printer.

•

There is a problem with the printer, such 
as a paper out condition.

Printing canceled.

•

The print job was canceled. Disconnect 
the USB cable or turn the camera off.

Camera overheating.
 Allow it to cool.

•

The camera has become hot because, 
for example, you use the camera for a 
long time in extremely hot place.
Turn the power off. Cool the camera and 
wait until the camera is ready to shoot 
again.

System error.

•

Turn the power off, remove the battery 
pack, then re-insert it. If the message 
appears frequently, consult your Sony 
dealer or local authorized Sony service 
facility.

Summary of Contents for DSLR-A100K - alpha; Digital Single Lens Reflex Camera
































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands