1-2
DSC-T500_L3
1-4. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the HOME screen. (When erasing the data, execute formatting the internal memory.)
Note 1:
When replacing the SY-209 board, erase the data in internal memory of the board before replacement.
Note 2:
When replacing the SY-209 board, execute formatting and initializing the internal memory after replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
This item does not appear when a “Memory Stick Duo” is inserted in the camera.
Formats the internal memory.
• Note that formatting permanently erases all data in the internal memory, including even protected images.
1
Touch [Format].
The message “All data on internal memory will be erased” appears.
2
Touch [OK].
Formatting starts.
To cancel the formatting
Touch [Cancel] or [BACK] in step
2
.
Format
Copies all images in the internal memory to a “Memory Stick Duo”.
1
Insert a “Memory Stick Duo” having sufficient free capacity.
2
Touch [Copy].
The message “All data on internal memory will be copied” appears.
3
Touch [OK].
Copying starts.
To cancel the copying
Touch [Cancel] or [BACK] in step
3
.
• Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little
remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data.
• You cannot select images to copy.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory
([Format] in [Internal Memory Tool])
• A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot
choose a specific floder and copy images to it.
• The
DPOF
(Print order) marks on the images are not copied.
Copy
1-2. PRECAUTION ON REPLACING THE LENS
When replacing the lens, write down the PITCH/YAW data and wide limit data given on the data sheet of the replacement lens for service.
Refer to Service Manual ADJ, and perform “Wide Limit adj” and “Angular velocity sensor sensitivity adj”.
Note:
The PITCH/YAW data and wide limit data of lens are written only repair parts.
1-3. PRECAUTION ON REPLACING THE MICROPHONE
Exchange two pieces at the same time when exchange microphones.
Adjust the condition of the reflow to 240 degrees or less and make time that it reaches 240 degrees within 30 seconds.
Do not close the sound hole when reflow.
.
Wide Limit Data (2-byte data)
XXXX
YAW data
t
L2
PITCH/YAW Data
PITCH data
t
L1
P.PP / Y.YY
P.PP/ Y.YY
XXXX
