0
GB
Calling
VOL+/− button
POWER
button
/
button
button
button
Check the following before operating
the unit.
– The
Bluetooth
function is active on
the mobile phone.
– Pairing of the unit and the
Bluetooth
mobile phone is complete.
1
Press and hold the POWER
button for about seconds
while the unit is turned off.
“Power On” appears on the display
as the indicator (blue) flashes
twice, and then the unit turns on.
The unit tries to connect to the last
Bluetooth
mobile phone that was
used.
Tip
The unit will stop trying to connect to
the
Bluetooth
mobile phone after 1
minute. In such a case, press the
button to try to connect again.
When the unit does not
connect to a
Bluetooth
mobile
phone automatically
You can make a connection by
operating
Bluetooth
mobile phone or
by operating the unit to connect the
last connected
Bluetooth
device.
To make a connection by
operating
Bluetooth
mobile
phone
1
Make the
Bluetooth
connection
(HFP or HSP
*
) from the
Bluetooth
mobile phone to the unit.
Refer to the manual supplied with
your
Bluetooth
mobile phone for
operation details.
The list of recognised devices
appears on the display of the
Bluetooth
mobile phone. The unit
is displayed as “DRC-BT60.”
When you use the
Bluetooth
mobile phone features both HFP
and HSP, set to HFP.
Note
When connecting to a
Bluetooth
mobile
phone which is different from the last
connected one, make the connection
following the above procedure.
* For details on profiles, see page 4.
