DR-BT100CX_4-130-037-51(1)
17
US
Calling
Jog switch
POWER
button
Multi function
button
Check the following before operating
the unit.
– The
Bluetooth
function is active on
the mobile phone.
– Pairing of this unit and the
Bluetooth
mobile phone is complete.
1
Press and hold the POWER
button for about seconds
while the unit is turned off.
The indicator (blue) flashes twice,
the unit turns on and then this unit
tries to connect to the last
Bluetooth
mobile phone that was
used.
Tip
This unit will stop trying to connect to
the
Bluetooth
mobile phone after 1
minute. In such a case, press the multi
function button to try to connect again.
When this unit does not
connect to a
Bluetooth
mobile
phone automatically
You can make a connection by
operating
Bluetooth
mobile phone or
by operating this unit to connect the
last connected
Bluetooth
device.
To make a connection by
operating
Bluetooth
mobile
phone
1
Make the
Bluetooth
connection
(HFP or HSP*) from the
Bluetooth
mobile phone to this
unit.
Refer to the manual supplied with
your
Bluetooth
mobile phone for
operation details.
The list of recognized devices
appears on the display of the
Bluetooth
mobile phone. This unit
is displayed as “DR-BT100CX.”
When you use the
Bluetooth
mobile phone features both HFP
(Hands-free Profile) and HSP
(Headset Profile), set to HFP.
Note
When connecting to a
Bluetooth
mobile
phone which is different from the last
connected one, make the connection
following the above procedure.
* For details on profiles, see page 4.
Continued
