38
GB
Follow the procedures below to install the
Picture Motion Browser.
Notes
• Please log on to Windows using a “Computer
administrator” user account.
• Be sure to close all running programs before
installing the software.
• The dialog boxes shown in this section are from
Windows Vista, unless otherwise specified. The
installation procedures and the dialog boxes shown
differ depending on the operating system.
1
Turn on your PC, start Windows,
and insert the supplied CD-ROM
into the CD-ROM drive of your PC.
The installation window is displayed
(page 35).
2
Click “Installing Picture Motion
Browser”.
The “Choose Setup Language” dialog box
is displayed.
3
Select your language and click
“Next”.
The “InstallShield Wizard” dialog box is
displayed.
4
Click “Next”.
The license agreement dialog box is
displayed.
5
Read the agreement thoroughly,
and if you agree, check “I accept the
terms of the license agreement” and
click “Next”.
The dialog box used to specify the
destination is displayed.
6
Check the destination and then click
“Next”.
The dialog box notifying you that the
program is ready to be installed is
displayed.
7
Click “Install” and follow the
instructions on the screen to
proceed with installation.
When you are prompted to restart your
PC, follow the displayed instructions to
restart it.
8
When the installation is complete,
remove the CD-ROM from your PC
and keep it for future use.
Notes
• If the installation fails, perform the installation
procedures from step 2 again.
• The supplied CD-ROM will be required when you
uninstall or re-install the Picture Motion Browser.
Keep it in a safe place for possible future use.
Installing the Picture Motion
Browser