11
GB
Basi
c ope
rati
ons
2
Pull the battery holder out.
3
Insert a new battery and slide the
battery holder back into the remote
control.
Insert the battery so that “+” is facing
upwards.
Notes
• Using a battery other than the specified one may
result in the battery rupturing.
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
• Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
– Do not recharge the battery.
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
Turning the photo frame
on
When you have already turned on your photo
frame by connecting it to the AC power source,
skip to the next section.
Turning on the power
Press
1
(on/standby) on the photo frame to
turn on the power. The standby indicator turns
to green from red
.
The Sony logo on the front
panel lights up.
Using the remote control (except for
DPF-A700/D700)
You can turn on/off the photo frame with the
1
(on/standby) button on the remote control.
Turning off the power
Hold
1
(on/standby) on the photo frame until
the power turns off. The standby indicator turns
to red from green
.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from an AC outlet or the photo frame. Doing
so may damage the photo frame.
Continued
Summary of Contents for DPF-A710/A700
Page 55: ...Sony Corporation ...