1-6
DNW-A28
DNW-A28P
Feet and Handle Removal
When installing the unit, remove the feet and handle on occasion.
If the feet and handle are removed, the height of the unit becomes 132 mm.
1.
Remove one each screw to remove the four feet.
n
Keep the screws and the feet removed.
When operating the unit after demounting it from the rack, be sure to reattach the four feet to protect the
cabinet from the damage.
Tightening torque: 78
x
10
_
2
N
.
m {8.0 kgf
.
cm}
2.
Remove the two screws to remove the handle.
n
Keep the screws and the handle removed.
When reattaching the handle, tighten the screws with the torque shown below and apply a locking
compound on the threads to avoid loosening of the screws and dropping the unit.
Tightening torque: 137
x
10
_
2
N
.
m {14.0 kgf
.
cm}
Screw (B3)
Screw (B3)
Foot
Foot
K4
x
16
K4
x
16
Handle
1-5. Installation Space
Summary of Contents for DNW-A28
Page 4: ......
