Sony DMXP01, Operating Instructions Manual

Page: 40 / 49

40
Battery life
When the multi meter mode of the
LCD is selected, the battery condition
is shown on the LCD.
To check the pwoer remaining in
the internal batteries
Shows the power remaining in
the eight LR6 (size AA)
alkaline batteries.
When the amount of power remaining
in the batteries is low, the battery
indication on the LCD starts flashing.
Replace the batteires with new ones,
or use the external battery.
For details, see “When the internal
batteries run low” below.
To the check the power
remaining in the external battery
The power remaining is
shown by the numerical value.
The power voltage input to the DC IN
10 - 15 V connector is shown on the
LCD.
The battery designed for a camcorder,
such as a lithium ion battery, is shut
down around 10 V. The numerical
value starts flashing when the battery
power decreases to less than 10 V.
Replace the external battery or use the
internal batteries.
For details, see “When the external
battery runs low” below. When the
external battery is equipped with a
battery indicator, check this battery
indicator, too.
When the external battery runs
low
When internal batteries are loaded in
the battery compartment, disconnect
the DC cable of the external battery.
The power is automatically supplied
from the internal batteries.
When the internal batteries run
low
Before removing the battery pack,
connect the DC cable of the external
battery to the DC IN 10 -15 V
connector with the power switch of
the unit set to on to switch to the
external battery.
Miscellaneous