101
Chaper 4 Operation Tips
Chapter 4 Operation Tips
Setting
• Connect AD 1 to 24 to CH-1 to CH-24.
• When the DMBK-R105 is inserted in
the option slot, connect each input
channel of the DMBK-R105 to Insertion
return 1 to 8.
• When the DMBK-R101/103/104/106/
107 is/are inserted, connect them
starting from the lowest slot number to
the channels from CH-25 in order.
Monaural
0 dB
0 Frame, COARSE: OFF
Control: Center, Button: ON
Front center
100 %
OFF
PGM L/R: ON
Control : Center, Button: OFF
Control :Center, Button: OFF,
EXPANDER: Access
Set all busses to monaural, OFF and
POST
Set all groups to GANG and OFF.
OFF
– infinity
• Connect PGM L/R busses to the PGM
L/R connectors.
• Connect the AUX 1 to 8 busses to the
AUX 1 to 8 connectors.
• When the DMBK-R105 is inserted in
the option slot, connect each output
channel of the DMBK-R105 to insertion
send 1 to 8.
• When the DMBK-R102/103/106/107 is/
are inserted, the MTR 1 to 8 are
connected.
All ON
About Titles
In operating the unit, data such as snapshots, dynamic
automation data, sampling frequencies and timecode
required for the mixing operation are stored in ‘Titles’.
There are two types of titles: One is the “current title”
automatically created in the flash memory, the other is
the title stored as a file.
For detailed information on how to create a title, see
“TITLE MANAGER Window” on page 82.
Initializing a title (CURRENT TITLE CLEAR)
A new current title which has no data is created based
on the current sampling frequency and timecode mode
setting. At this time, all data other than the sampling
frequency and timecode are cleared.
The current title is the working title created in the
memory or flash memory.
Saving a title
The current title is saved into the specified TITLE
number.
Loading a title
The specified title is loaded as the current title.
If the setting for Fs (sampling frequency) and/or
SYNC SOURCE is different between the loaded title
and current title, the unit restarts after giving a
confirmation message.
Changing the sampling frequency
When you change the sampling frequency, the
contents of the current title is cleared.
Titles when turning on the power of the
unit
When there are created titles
• The sampling frequency, sync source and timecode
mode are set on the unit according to the content of
the existing title.
• The current title worked on just before turning off the
unit is automatically loaded. The dynamic automation
data is automatically loaded into the effective buffers.
When you use the unit for first time (with the
default setting) or there are no current files
The current title is created with the following settings.
• Sampling frequency: 48 kHz
• Sync-lock (reference synchronous signal):
INTERNAL
• Timecode mode: NTSC30NDF
• Initial cue: 00:00:00:01
• Event: not linked.
Default setting of the unit
Item
Input routing
Channel mode
Trim setting of
the input signal
Delay amount
Pan, MTR pan
Surround pan
Divergence
MTR assign
PGM assign
Equalizer
Dynamics
AUX send
Fader group
Cut
Fader
Output routing
Copy/Link
function
Summary of Contents for DMX-R100
