Sony DK110NLR5, Instruction Manual

Page: 47 / 72

(E)
7 DK110NLR5
6. Optional Accessories
• Feeler set: DZ-5100
[Items DZ-5100]
Measuring force Bend
0.3 N 2 to 3 u m
0.6 to 0.7 N 4 to 5
u
m
1 to 1.2 N 6 to 7 u m
DZ-126 (Plastic ball-pointed feeler)
* 1
DZ-131 (Carbide tipped flat feeler)
DZ-141 (Off-center feeler) * 2 DZ-151 (Needle feeler)
φ
1.5
M2.5
15
5
φ 6
M2.5
φ 6.5
8
M2.5
12.5
φ 7 10
19.3
φ 7
φ
5
M2.5
12
Note
*
1 Take care not to drop the measuring unit on or scrape it against measured objects of
hard material or with rough surface.
*
2 Since the feeler tip is located off the spindle’s axis, a variation of up to a count of two
may result in the measurements. The feeler arm may be bent by measuring forces (see
the figure below). But the bend little affects the measuring accuracy owing to the
constant measuring force.
Unit: mm
• Gauge stand: DZ-501
Ceramic surface plate 110 mm x 110 mm
Mass 13 kg
•
Gauge stand: DZ-531
Large stone surface plate 350 mm
x
350 mm
Mass 38 kg
• Measuring force balancer: DZ-581