Sony Digital Duplicator Operating Instructions Manual Download Page 71

Page: 71 / 84

the
r O

erati

ons

Recording using the
receiver

You can record from an audio/video
component using the receiver. For details,
refer to the operating instructions supplied
with your recording component.

You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.

Press one of the input buttons
to select the playback
component.

You can also use INPUT SELECTOR on
the receiver.

Prepare the playback
component for playing.

For example, tune to the radio station you
want to record (page 55).

Prepare the recording
component.

Insert a blank CD-R into the CD recorder
and adjust the recording level.

Start recording on the
recording component, then
start playback on the playback
component.

Note

Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R OUT jacks.

Press one of the input buttons
to select the playback
component.

You can also use INPUT SELECTOR on
the receiver.

Prepare the playback
component for playing.

For example, insert the video tape you
want to copy into the VCR.

Prepare the recording
component.

Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.

Start recording on the
recording component, then
start playback on the playback
component.

Note

Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the source.

Recording onto a CD-R

Recording onto a recording
media

Summary of Contents for Digital Duplicator





















































































Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands

Sony Digital Duplicator, Operating Instructions Manual

Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands