Sony Digital Duplicator Operating Instructions Manual Download Page 78

Page: 78 / 84

There is no sound from the component
connected to the DIGITAL MEDIA
PORT adapter.

• Adjust the volume of this receiver.
• The DIGITAL MEDIA PORT adapter

and/or component is not connected
correctly. Turn off the receiver, then
reconnect the DIGITAL MEDIA PORT
adapter and/or component.

• Check the DIGITAL MEDIA PORT

adapter and/or component device to make
sure it supports this receiver.

The MULTI CHANNEL DECODING lamp
does not light up.

• Check that the playback component is

connected to a digital jack and the input is
selected properly on this receiver.

• Check whether the input source of the

software being played back corresponds to
the multi channel format.

• Check whether the setup on the playback

component is set to multi channel sound.

Video

There is no picture or an unclear
picture appears on the TV screen.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.
• Move your audio components away from

the TV.

• Depending on the DIGITAL MEDIA

PORT adapter, video output may not be
possible.

Recording cannot be carried out.

• Check that the components are connected

correctly.

• Select the source component using the

input buttons.

HDMI

The source sound input to the HDMI
jack on the receiver is not output from
the receiver or the TV speaker.

• Check the HDMI connection (page 21).
• You cannot listen to the Super Audio CD

by connecting HDMI.

• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with each component.

The source image input to the HDMI
jack on the receiver is not output from
the TV.

• Check the HDMI connection (page 21).
• Depending on the playback component,

you may need to set up the component.
Refer to the operating instructions
supplied with the each component.

The control for HDMI function does not
work.

• Check the HDMI connection (page 21).
• Make sure “CONTROL FOR HDMI” is

set to “CTRL ON” in VIDEO menu.

• Make sure the connected component is

compatible with the Control for HDMI
function.

• Check the Control for HDMI settings on

the connected component. Refer to the
operating instructions of the connected
component.

• If you change the HDMI connection,

connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of “Preparing Control for
HDMI function” (page 61).

Summary of Contents for Digital Duplicator





















































































Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands

Sony Digital Duplicator, Operating Instructions Manual

Search results

Summary of Contents for Digital Duplicator

Reviews:

Related manuals for Digital Duplicator

Brands by name

Popular brands