107
Saving and Loading Scene Files
Cha
pt
er 6
Sa
v
ing an
d Load
ing Us
er Se
tt
ing
Dat
a
3
Load a scene file.
To load a scene file stored in the camcorder
Turn the MENU knob to move the
b
mark to the
desired file number, and press the MENU knob.
The
s
which is displayed on the left of the file number
changes to
x
.
The camcorder is set up according to the loaded scene
file.
To cancel the selected scene file
Move the
b
mark to
x
, and press the MENU knob.
x
changes to
s
.
The camcorder returns to the settings before selecting
this scene file.
To load a scene file saved in the “Memory Stick”
Proceed as follows:
1
Turn the MENU knob to move the
b
mark to
“SCENE RECALL,” and press the MENU knob.
The P00 SCENE RECALL page appears.
2
Turn the MENU knob until the page which
contains the desired file number appears, then press
the MENU knob.
3
Turn the MENU knob to move the
b
mark to the
desired file number, and press the MENU knob.
The message “RECALL OK? YES
b
NO” appears.
4
To carry out the recall, move the
b
mark to “YES” and
press the MENU knob.
To cancel, press the MENU knob leaving the
b
mark
pointing to “NO.”
When the loading is completed, the message
“COMPLETE” appears. The camcorder is set up
according to the loaded scene file.
If no file is present with a particular file number, this is
shown as “NO FILE.”
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Loading scene files from a “Memory Stick”
into the camcorder memory
You can load up to five scene files stored in the “Memory
Stick” into the camcorder memory in a single operation.
1
After displaying the SCENE FILE page
(page 104)
,
turn the MENU knob to move the
b
mark to “SCENE
RECALL,” and press the MENU knob.
A SCENE RECALL page appears.
2
Turn the MENU knob until the SCENE RECALL page
which contains the desired scene files appears, then
press the MENU knob.
3
Turn the MENU knob to move the
b
mark to “5FILE
LOAD
b
MEM 1-5,” and press the MENU knob.
The message “RECALL OK? YES
b
NO” appears.
4
To carry out the recall, move the
b
mark to “YES” and
press the MENU knob.
To cancel, press the MENU knob leaving the
b
mark
pointing to “NO.”
When loading is complete, the message
“COMPLETE” appears and the ACCESS indicator
goes off.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
• The scene files loaded from the “Memory Stick”
overwrite data saved in the camcorder memory.
F04 SCENE FILE
s
1 :SCENE 25
x
2 :SCENE 26
s
3 :SCENE 27
s
4 :SCENE 28
s
5 :NO FILE
s
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21
TOP
?P00 SCENE RECALL
DISPLAY MODE : F.ID
MEM<1>:STANDARD
MEM<2>:STANDARD
MEM<3>:STANDARD
MEM<4>:STANDARD
MEM<5>:NO FILE
ESC
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE : ALL
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD MEM1-5
ESC
Notes
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE : ALL
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD MEM1-5
ESC